1.Temperature measurement, display; refrigeration, heating control
2.Temperature setting upper and lower limits
3.Simple operation, suitable for seafood machines.
4.Easy to install
1.Measurement range: - 50°C ~ 110°C
2.Control range: - 50°C ~ 110°C
3.Measuring accuracy: plus or minus 0.2 °C
4.Control precision: plus or minus 0.1 °C
5.Measuring input: NTC10K L= 1 m waterproof probe
9.Size: 60 * 45 * 30 mm
How to use:
1. Press the up button show the starting temperature
long press UP button the temperature display Flashing , press the UP or Down button Set the start temperature value
2. Press the Down button show the Stop temperature
long press Down button the temperature display Flashing , press the UP or Down button Set the stop temperature value
The input voltage and output voltage is synchronous of this temperature controller .In other words ,when temperature controller under the status of working (indicator light is bright),input voltage equal to output voltage ,when temperature controller under the status of break (indicator light goes off),no voltage output from output terminal.
Indicator light bright means output from terminal.
Indicator light goes off means no output from terminal.
Heating mode setting solution
Setting method :
Start-up temperature<stop temperature(procedure judge the working mode as heating automatically)
1.Press the up-regulation keyboard ,light flashing when started-up temperature, set start temperature value by press up and down button.
2.Press the down-regulation keyboard ,light stop flashing when stopped temperature, set stop temperature value by press up and down button.
Control water heater, stop heating at 65?,reheating when temperature fallen to 50 ?.
STEP1:Make sure the working mode is heating, start-up temperature<stop temperature
STEP2:Press up-regulation keyboard to start temperature flashing and set starting- temperature at 50 ? by pressed up and down button
STEP3:Press down-regulation keyboard , Stop temperature light flashing ,Setting up and down button to stop temperature at 65 ? then complete setting.
Cooling mode setting solution
Setting method :Start-up temperature >Stop temperature (producer judge working mode as cooling automatically).
1 Press up-regulation keyboard ,start temperature flashing ,setting start temperature value by pressed up and down button.
2 Press down-regulation keyboard , stop temperature flashing, setting stop temperature value by pressed up and down button.
Control farm: blower regulate temperature at 26?,it will start cooling again when temperature return 28? .
STEP1:Make sure the working mode is cooling ,started up temperature > stop temperature
STEP2:Press up-regulation keyboard to start temperature flashing and set starting- temperature at 28 ? by pressed up and down button
STEP3:Press down-regulation keyboard to stop temperature flashing and stop temperature at 26 by pressed up and down button then complete setting.
Setting start-up temperature
Press UP- regulation keyboard and display starting-up temperature press the up-regulation keyboard 3 seconds to start temperature digits flashing, Set value of temperature by up and down regulation keyboards.
Setting stop temperature.
Press the down-regulation keyboard to display stop-temperature ,press the down-regulation keyboard 3 seconds to stop temperature digits flashing.
In the case of electricity, press the up and down regulation keyboard in the same time digital tube displaying “888” then strip into temperature detection automatically then restore factory settings.
1 x 220V LED Digital Temperature Controller
1 x NTC Sensor Probe