ELectronic ENgineers e-shop
WhatsApp +99470-355-77-72
Пт, 2023-02-03, 23:19
Приветствую Вас Гость | RSS
Телефон(WhatsApp):+994703557772
Меню сайта
Категории раздела
Мои файлы [12]
Новости сайта [0]
Мини-чат
Наш опрос
Оцените мой сайт
Всего ответов: 354
Статистика

Онлайн всего: 1
Гостей: 1
Пользователей: 0
Главная » Файлы » Мои файлы

Difference between MPU6000 vs MPU6050 vs MPU6500 vs MPU9150 vs MPU9250
2023-01-02, 00:42

MPU6000 and MPU6050

Deep down, MPU6000 and MPU6050 are the same same hardware. They both have the same 3 axis gyroscope and the same 3 axis accelerometer. Both allows max 8kHz gyro sampling rate. From a flight controllers point of view, the only difference between them is bus that connects them to CPU. MPU6000 allows for both I2C and SPI, while MPU6050 has only I2C. That makes MPU6000 better device, but only when SPI bus is in use. I2C is too slow to handle 8kHz gyro updates.

MPU6500

No, MPU6500 is a different monster. It supports both I2C and SPI, allows 32kHz gyro update rate and has much wider gyro signal bandwidth. Is also smaller and consumes less energy. So, in theory, it is much better device than MPU6000. There are some problems with it. First of all, it is much more vibration sensitive than MPU6000. While soft mounting of MPU6000 is usually not needed, MPU6500 will benefit a lot from it. Very often it is even required. Second of all, at this moment, only RaceFlight can utilize 32kHz gyro update rates.

MPU9150 and MPU9250

What are those two MPUs? It's rather simple this time.

  • MPU9150 is a MPU6050 with integrated AK8975 magnetometer
  • MPU9250 is a MPU6500 with integrated AK8963 magnetometer

Datasheet MPU6000 & MPU6050

https://quadmeup.com/

Категория: Мои файлы | Добавил: elektronwik1
Просмотров: 22 | Загрузок: 0 | Рейтинг: 0.0/0
Всего комментариев: 0
avatar
Поиск
Вход на сайт
Корзина
Ваша корзина пуста
Copyright WWW.ELEN.AZ Baku Azerbaijan © 2023 Телефон(WhatsApp):+994703557772