DC 3.7V-6V To 400KV Boost Step Up Module High Voltage Generator Pulse Arc Generator Ignition Coil Module

Square 3.7-6v to 400KV 65mm

Note:
1. Avoid power on when there is no load! Before starting the machine, the appropriate distance of the high-voltage terminal must be adjusted. The longer the arc distance, the higher the input voltage and the greater the battery capacity.
2. It is forbidden to exceed the maximum arc distance. Otherwise, because the pressure is too high, the module is easily damaged and cannot release energy.
3. Can't work long hours!
4. Please connect the metal after the test to release the remaining energy!
5. High voltage arc generator, high temperature arc generator, can not ignite paper or cigarettes

Work: intermittent, continuous work is not allowed to exceed 1 minute and the output side is not allowed to short circuit. Incorrect voltage and long working time can easily damage the module!!

description:
1. Module model: MC-CBPG
2. Volume: 40 * 36.5 * 8mm
3. Input voltage: 3.7V-6V
4. Input current: 0.5A-1A
5. Input line length: about 4 cm
6. High voltage type: pulse DC type
7. Output voltage: about 400KV (please pay attention to safety when using!)
8. Discharge distance of high voltage pole: 1.5cm-2cm
9. About power supply: 6V and above 2000mAh are recommended for best results

feature:
1. High voltage pulse current output
2. Small size
3. High efficiency
4. Simple peripheral circuit (only need button and battery)

Machine application:
1. Scientific experiment
2. Electronic Instruments
3. Ionizer
4. DIY kit

Добавил: elektroshoker22, Вт, 2019-10-01

Просмотренные ранее товары